Electrical & Mechanical Controls Ltd – EMC LTD 21 Years of experience counts. Phone 01603 625535


Bring on the electrical switchboards. Need a board? Give us a call.

It has been a good year up to now. A good client base and reasonably buoyant building industry means work is going well.

We now pushing / advertising the switchgear side of things so should you have any requirements for

  • Panel board
  • Switchboard
  • Consumer unit / Split load lighting boards.

Our preferred supplier of components is tyco electronics.

We can offer a simple single incomer solution consisting of a single device for instance a 1600 amp acb. This then feeds on to multiple outgoing circuits you can choose from mccb, fused switch or switch disconnector.

Our larger switchboard typically take the following spec

Paint Finish: Light Grey RAL 7035

BS EN 60439-1: 1999 Form 4 Type 6

IP Rating: 3X

400V 3ph 4 Wire 50Hz

Busbar Type: Unplated

Busbar Rating: 1250A / 2500A / 3200A 4 Pole

Fault Withstand: 50kA 1s

Breaking Capacity: 50kA

Access for cabling: Front or rear Access

Incoming cables: Top/Bottom


Installation by EMC.dual-incoming-switchboard-1600a-norwich

Just send us a schematic or sketch and we can draw up a constructional proof and schematic. We are all engineers and anything is possible. Having the skills in fine electrical control we also have the skills to create complex automatic changeover situations. If you need your building to be backed up via a generator or your computer suite backed up by industrial ups then have no fear we can assist.


Filed under: General Comments Off